Rubber decking is the main material to consider when you need to install deckling on the commercial sector. Wherever you have a lot of people walking or working, the rubber deckling offerrs the best safety net because of the non-slip feature. Rubber decklng is made from the same material as the tires on your vehicle, so you know that it is worth the extra money you must pay for it. It is maintenance free and you will not need use for any type of deck sealer to keep it waterproof as you would with wood deckling.
The rubber decking is not made using bonding agent and therefore has no air gap. Whether it is vulnerable to the contraction or expansion and for this reason, if you choose this type of maintenance-free decking you can expect to see less than ½ inch of movement within a 20 feet length of decking. No need for painting, staining or the use of wood deck sealers. The rubber surface can be polished so that you have the ultimate non-slip surface. As this material is very waterlight, you may need to clear the water off of it after rain, if you have the decking exposed.
When you install a rubber decking, you may have to decking material that can withstand various temperature. It is suitable for temperatures of zero to those that exceed 100 °. But for colder climates where the winter temperature dip below zero, the maintenance free decking perhaps not suitable for outdoors use. Although the use of rubber will increase the life your deck by about 5 years, you must consider climate before you buy this material.
The prices of rubber decking is not cheap. A board measuring of 1 cm thick and 8 inches wide in black costs about $ 2 each feet, while the same size board in the grey or terra cotta cost more than $ 3 each feet. These maintenance-free flooring comes with 25 years warranty, but there are conditions attached. Although you want decking that does not require maintenance or the use of wood deck sealers, you must ensure that the decking has been installed correctly. The support system should have centers no more than 18 inches apart and each rubber board has been fastened to each center. If you are using equipment that is heavier than 1,000 pounds on the decking of rubber this will also void the warranty.
Rubber flooring is also known as Rumber. You can cut it with a saw if you install the decking material. However, you must use a carbide tip blade with large teeth. To buy rubber board for installing maintenance-free treatment, you can also buy rubber decking material in sheets. You have to fasten the rubber to the center support so that the middle of deck is not loose.